Jim Phillips Custom Surfboards

Surfing RI

2009-09-04T13:46:00.000-07:00

This is Point Judith. I was the king of that place, rode it bigger than anyone in 69-70. The wind blew onshore for week, I awoke one morning and I heard birds chirping outside my window, ran to the living room and looked out on Narragansett bay. The ocean looked like it was tipping back and forth on a teeter-totter as the south swells marched by.

I broke out my 7'10"x 17-1/2' with 10" nose rocker Black Beauty gun for the first time - it was like riding snot it was so smooth on those 12-14 foot perfect peaks.

Billabong :: Art of Shaping

2009-08-13T13:38:00.001-07:00

Introduction

Billabong USA is proud to announce the second annual "Billabong Art of Shaping Event" to be held September 10th-11th at the ASR Action Sports Retailer Trade Show in San Diego CA. This years' "Billabong Art of Shaping: San Diego Edition" event will feature many of the top shapers from the rich board building heritage of San Diego county. The finalized list of invitees includes Bill Bahne, Tim Bessell, Chris Christenson, Carl Ekstrom, Rick Hamon, Gary Hanel, John Kies, Gary Linden, Steve Lis, Larry Mabile, Gary MacNabb, Bob Mitsven, Rich "Toby" Pavel, Steve Pendarvis, Jim Phillips, Rusty Preisendorfer, Robin Prodanovich, Steve Seebold, Donald Takayama, Hank Warner, Xanadu and Marcio Zouvi.

San Diego County is famous for its talented crew of designers and shapers that have introduced a significant number of innovations such as the Stevie Lis Fish, the Ekstrom asymmetrical, the Rich Pavel Speedialer, the Donald Takayama Step Deck and other notable designs which have had a remarkable effect on the sport of surfing and the surfboard itself.

The intention of Billabong's 2009 Art of Shaping San Diego Edition Event is to showcase and pay tribute to San Diego County shapers and their invaluable accomplishments and contributions to the art of surfboard building over the last five decades. Close examination of the list of invitees will reveal shapers from each decade that collectively have established the reputation of San Diego County as the "hotbed of innovative surfboard design, construction and forward thinking."

The Concept

The concept of the "Billabong Art of Shaping Event" is simple; it is a venue to showcase the talent of San Diego surfboard shapers and craftsmen by allowing them to build boards that highlight their particular contribution or influence on the evolution of the surfboard over a particular span in time. Shapers are invited and encouraged to "create a board representing the era, style, or shape they are best known for or relate to"; or whatever best motivates their creativity and talent.

The shapers entry is then placed on display at the ASR trade show along with full sized images of the shaper himself and a profile that includes information on the board he choose to build, his company or label, and his shaping history or career.

How it Works

Once a chosen shaper accepts the invitation to participate in The Billabong Art of Shaping San Diego Edition Event he is issued a check for $600 cash to be used towards materials for his entry of choice. The shaper is then free to submit whatever type of board he deems appropriate; knowing his board will be showcased with those of his peers. The Billabong Art of Shaping Event will feature 23 boards from 23 different shapers on display Thursday September 10th and Friday September 11th at ASR in the San Diego Convention Center.

A Shaper’s Reception will be held in a separate conference room on the Mezzanine in the Convention Center on Friday afternoon beginning at 4:00 PM. Here shapers will be available to meet guests and talk story while sharing about the boards they have created.

At approximately 6:30 PM a Live Auction will begin where each and every board will be auctioned off to benefit The SIMA Humanitarian Fund. The board that secures the highest auction price at the Live Auction becomes the largest single donor to the SIMA Humanitarian Fund; the charity chosen for the "Billabong Art of Shaping Event", and is awarded a check from Billabong for $2,000. The runner up will receive a full page ad in SURFING Magazine's "Board Builder's Issue" featuring his boards and company.

Intended Schedule of Events

During the course of the show guests are invited to view the boards, read the stories and place silent auction bids on any of the boards of their choice, these will be the opening bids at the Live Auction. The booth will be hosted by Royce Cansler and Eric "Bird" Huffman, who collectively have an extensive knowledge of San Diego shapers and their accomplishments.

On Friday afternoon starting at 4:00 PM the boards will be on the mezzanine level of the San Diego Convention Center in an upstairs conference room where a catered Shapers Reception will be held and guests can have a drink and nibble on some pupu’s while they view and examine the fruits of the shapers.
The reception is open to invited guests from the public that have signed up and RSVP'd in advance for the evening auction by going to billabong.com/artofshaping.

From 4:00 PM to 6:00 PM guests will be able to closely view each entry in preparation for the live auction. During the viewing period guests can enjoy pupu's, Primo beer, Wild Rock wine, Sambazon smoothies and Smart water in an effort to prime the pump before the bidding begins.

Guests making purchases that night will be allowed to take their purchases with them upon payment in full: cash and/or major credit cards will be the only acceptable means of payment.

Who's Your Daddy?

2009-07-17T20:52:00.000-07:00

Who influenced your shaping? Who are the guys you looked up to? Who knocked you down a peg when you thought your were the shit? These are the guys that shaped me:

In the early days of Hawaii it was Wally Froseith, George Downing, Bob Sheppard, Brewer, Diff, Joe Quigg and the Inter-Islands crew. When I hit the east coast the above guys remained GODS until I met Tinker - then I knew what a real surfboard craftsman was all about. Then it goes back along Tinkers lineage, it boils down to Simmons, Velzy, Wardy, Jacobs and Larry Bailey who was Tinker's sensei.

Billabong Art of Shaping Event

2009-05-05T09:42:00.000-07:00

I'm gearing up to shape another show board. This time the the folks at Billabong are holding the Billabong Art of Shaping Event at this years Sept ASR show. I have the board I want to do in mind so now it's time to start drawing it out and then start planing to get her done by Sept. Stay tuned for some "spy" photos of the building of the board.

Hi Jim,

I just wanted to drop you a quick note to welcome you to the Billabong Art of Shaping Event and say thank you very much for your decision to participate in our event.

I have attached the list of the charities that will be recipients of the funds we will raise at this years event since I didn’t really expand on them too much yesterday.

I hope you are getting some good ideas about what kind of board to make for the event!

Stay healthy, keep surfing,

Royce

Royce Cansler
Billabong
Director of Specialty Retailer Relations

Challenger Then and Now

2009-04-02T13:10:00.000-07:00

In 1966 and 1967 Challenger Eastern Surfboards were at the top of the curve for quality, West Coast or East Coast. Tinker had a recording studio in the factory where our hot coater and finner would rehearse and record some of his early music for his band, Steel Mill. Tinker asked me to reproduce one of the Challenger Easterns, so this is what I pulled out the stops for.

A 9'2" square tail, hips behind center with a slightly pulled 17" nose, glass tail block and a glass on red glass fin. Center stick is a reverse t-band of 2-5/8" spalted balsas flanking a 1/16" redwood center. The rocker is slightly flipped in the tail flowing to a smooth low nose rocker. The bottom is low in the tip of the tail, transitioning to a neutral rail on a slightly rolled bottom. The lamination is clear with rail deck panels consisting of red pin lines around transparent yellow/honey inside the pins. It is ready to ride or nail to the wall. The board was auctioned off by one of the artists from Steel Mill, a guy named Bruce Springsteen, at a benefit at the Count Basie Theater.

Challenger Eastern

2009-04-02T13:01:00.000-07:00

Bill Bahne and Frank McLeary started Challenger, they were in financial problems and Tinker had a good relationship with Grubby (Clark). Tinker was an electrical engineer by education, shaped for Wardy, Hobie and the crew from South Bay. He did some impossible jobs for Grubby and came away with a stash of foam for his effort. Frank and Bill were back in business, now with a new partner, Tinker.

Frank glassed, Ernie Vohs sanded, Jimmie Dalton glossed, Bahne shaped…wait, we have a new shaper so later Bill slowly got squeezed out of the partnership. Frank came to work while still dark and got his glassing done by dawn and was out the door for the rest of the day. Then it was a joint and some waves - no time for the book work.

Tinker saw that the lions share of the orders were going to the East Coast and it would be only sensible to have a factory on the east coast and west coast. Frank didn't think much of this idea as it would require running a business and being a glasser. Nothing could be worked out which turned into a division of assets and Tinker went straight across country to Florida, where he and the entire crew landing at Billy Feinbergs Oceanside Surfboards factory in Rockledge. It was a stopping point to put together an additional grubstake. With pockets filled, it was off to Neptune New Jersey, they had plentiful dealers in the area and it was the perfect location to serve north and south.This was where I first came into contact with Tinker.

Up to now I was the shit along Long Island New York and New Jersey beaches. This is where I get chopped down more than a few notches. BUT, this is where there was a MAJOR turning point in my learning how to really SHAPE. There was a connection between Challenger and Challenger Eastern Surfboards and the deal was Challenger Eastern was to not sell boards west of the Mississippi. However, when Bobby Thomas took over as the new owner of Challenger surfboards, he considered the old contract null and void and started a campaign to sell to the east coast. This was at the time of the V-bottom boards and Challenger Eastern was on its decline as a major player on the east coast market.

It was the summer of love and I discovered love in many fashions, some still frowned upon by society and the law. Tinker was not happy that I had brought myself to the attention of the local constabulary, he said that I was going to get busted, that I was a walking bust. Now that I had grown as a shaper I could now do more than the shaping load that was apportioned to me and do it quite well at that. So I stared whoring my self around to Rible Surboards and Surfboards East in Freehold. As you can imagine this went over like a ton of shit with Tinker. He felt, and rightly so, that he had imparted this knowledge and skills upon me and I was out delivering these benefits to his local competition.

Later that winter I went to California, got promptly busted, needed a job really bad and hitch hiked from Goleta to Del Mar to the Bahne, Chaninn and Diffenderfer factory. I got hired on the spot to shape, although Bahne said he would have to re-educate me away from Tinkers “evil” ways.

Tinker and I stayed on very bad terms for many a year. I went to a wedding for Ernie Vohs, the sander, and several years’ later I crossed paths with Tinker while riding around puffing one. I saw him running across the road to me from his still moving car. I raised my hand to signal a sort of wave and he was at my open window. What happened next is not a blur and it is permanently etched into my mind so that lest I ever forget it, I may be struck by lightning. Tinker’s hand snaked through the open window and gently cradled the back of my head in the open palm of his hand. His mouth opened and he said, "Your going to burn my factory down?" Wham! "You’re going to kick my ass?" Wham! Each sentence was punctuated with his other hand, made into a very hard fist, connecting with my eyebrow. After more than a few of these "dotting of my eye" it became time for me to say something in return............ and that was....."Hey can't we talk about this?" Tinker wasn't finished talking yet and he replied "You already done yer talking!" and eased his hand off the back of my very befuddled head.

It was a real long time before we spoke again and it would be even longer before our paths crossed. It was one of the first life lessons that ever sunk in and I don't need a refresher course. We are once again, as we were, very respectful friends.

Dale Dobson

2009-04-02T13:00:00.001-07:00

Tinker had Dale in Rockaway, NY for a demo. Dales teeth were in terrible shape and he had a throbbing toothache. Dale gets Tinkers ammo can of tools and finds channel lock pliers inside. This is not something you ever want to witness! Soon he has the offending tooth out and in short notice has a bag of jelly doughnuts, munching away on them. It makes my teeth hurt just thinking about it. Bill Bahne eventually springs for a set of dentures for Dale.

While riding for Donald Takayama, Dale sits in on his new shape. Now only those of you that have EVER shaped a board for Dale can really appreciate this; Donald is done and Dale asks if Donald can make it any thicker. WTF? Donald bends down and scoops the foam dust off the floor and tosses it back on the shaped blank.

About 2002 I shape Dale a Surfboards Hawaii. Dale has ridden for EVERY southern California label and he come back ranting that this is the best board yet. The next day he comes to me and says, "You know I rode the board at low tide and it ripped, but when I took it out at high tide it did NOT float me as well with all that extra water under it.” There was ABSOLUTELY no point of arguing with him – he fought any explanation tooth and nail that he may have been wrong.

Dale hated the nose rider I shaped for him. Only at the insistence of others who rode it also did he relent and get back on the board. He took the board he hated so much to the Oceanside Longboard Club Noseriding Contest and ripped. He won the contest on it beating the competition by a total of 2 minutes of nose time and took home the grand prize of $3,000.

Dale loved his boards until the 28th or 29th of the month, then they went on the auction block to pay the next months bills.

Dale does not surf anymore. He had nerve damage in his neck and had been sober a long while, but the alcohol was a self-medicating haven for him. He also suffers from sever depression. From what I have seen of his childhood, I would be seriously emotionally depressed too.

God love him and watch over him

The "White Whale"

2009-03-25T17:11:00.000-07:00

The infamous "White Whale", a '51 Chevy former bakery delivery panel with a '53 GMC bored out to 301 CID, '34 Ford dump truck tranny, straight cut gears, double clutch for each shift. It died inside the factory on 9th Ave in Neptune during the factory fire. My grandmother died the day before and I was in NJ and drove by the factory to try and reconcile with Tinker, little did I know all I would see was water soaked remains with a 16" I-beam which had fallen right through the roof of the "White Whale" and into the concrete floor. It sat there with only the wire belting of the tires remaining on the rims…a sad sight to see.

Tinker had me drive the “White Whale” to Rhode Island for a contest while he drove his "58 Chevy wagon, snow white just like the "Whale." It was all about getting power from these engines and Tinker ran no fan on the engine because it pulled away too much horsepower. I stopped at the end of the New York freeway to gas up and check all the engine fluids; the underpaid gas station attendant forgot to screw back on the radiator cap. Not good. Off we went and in a few miles the engine temp was on the rise. Tinker had an extra heater core installed for slow traffic situations for additional cooling so I flipped on the heater fan but the engine temp just kept climbing.

Connecticut has a lot of reservoirs and ponds so I pulled off an exit, turned off the engine to help it cool down, and filled up the spare jugs with water. I was only about 19 years old and little real automotive expertise.

With the radiator cap off and the jugs off water filling it up. The “Whale” started making all kinds if groans and squeaks as it sat there drinking up the pond water. When the temp gauge said cold I tried to start it, but as I turned the key it was like the battery was low. We were on a down slope so the rest of the team started pushing the truck and I popped the clutch and the "Whale" roared to life. With the crew back on board, off we went, but in just a few miles the temp stated going back up again. We got to another pond and loaded up with water again however, this time the starter wouldn't turn over the engine at all. Again we were on a really steep grade, an off ramp, and started coasting for the clutch pop again. I got up to about 25 MPH and when I let the clutch out the rears tire squealed before the engine turned over but did not start. I still had enough speed to coast up the on ramp quite a ways so I rolled it backwards and up the ramp we went where I popped the clutch again. This time it did not start and a deluge of water shot out the tail pipe. Even with little auto repair experience I knew there was no direct route of water to combustion chambers. This was an era of no cell phones and no way to contact Tinker and tell him of his beloved truck. It was getting very late by then so Bob Bernokeitz and myself started hitching for Rhode Island. We got there in 2 rides, but it was near midnight by then.

Of course back then nothing was open past 10, and we had no money anyway, but we were able to find and old, abandoned hotel in Narragansett. We ran around in the dark until we found an unlocked window which we popped open and crawled through. We got as comfortable as possible and tried to sleep the rest of the night. At first light we were up and waiting for Tinker at the contest site. He found the two of us soon enough, we gave him the low down on the “Whale” and the rest of the guys. He promptly blew off the contest to rescue the rest of the boys and retrieve the "Whale".

This is when Tinker goes into overdrive. We get to the truck and he tries to start it with jumper cables but before long he see the solder around the radiator brackets is melted and says, "Do you know what temperature solder melts at?!!! 750 fucking degrees!" He starts to partially disassemble the motor on the side of the road, but stops and goes for a tow bar to take the "Whale" back to NJ.

The engine got sooooo hot. How hot was it? It was so hot the valve seats came out of the head and were sitting around the neck of the valves. Of course the head had to be machined which Tinker took care of and then put it back together. Scared shitless I tell him I will pay for the repairs, but he backs off. The “Whale” was as good as new until its untimely death years later.

On Shaping

2009-01-15T11:24:00.000-08:00

I always thank the shapers who were better than myself and all who loaned me a portion of the wisdom and skills they too had gathered over the years. Had I not stumbled into Tinker and been fortunate enough to apprentice with him, I feel I would have been an average shaper at the best. The skills that others possess do not overnight become embedded and magically become available the next time one goes into the shaping room. Shaping is not cabinet making, where all lines are plumb and true, running 90 degrees to each other, rather a mix of sculpture, tool use and in the end, applying surfing knowledge to extract from a pliable, curved surface, a smooth, flowing, surfcraft. Do this several thousand times and then something starts to click, a routine is set and finally consistant surfboards that work become what you have been striving for.

The week before Christmas

2008-12-21T08:35:00.000-08:00

The rains have ended, I can again return to laying out custom stringer combinations for two Ka po'e a'ea Models.

This is a concept that I brought to life for myself, I wanted a board that was the epitomy of what Brewer or Diff would have made as as semi-gun in 1964, my graduation year from Arthur W. Radford High School in Honolulu, Hawaii.

The rockers were modernized, but the plan shape was North Shore geev'um bra'. The rails are high in the nose, with a slight belly under the entry rocker, mid section eases off with a gas peddle area under the front foot, the rails go to hard in the tail with a rocker that was gleened from the 9'5" Clark, 10'4" Barnfield, 9'1" Brewer private collection. On first glimpse, the tail rocker looks a little extreme, but once the board in into a wave, it becomes alive with it's ability to fit in critical sections.

During the first few years on the North Shore, I had been riding it with a Yater 9" fin, the board rode OK, but I felt I was more hanging on than surfing this board. It was not until an epic summer swell at Malibu while assisting in filming a documentary about ancient board designs, that I got to ride this board with a different fin. I borrowed a super raked 10" fin from my body guard, Brad Schaffner, black belt, ultimate fighting champion, Corn Bread Mafia enforcer, spiritual adviser. Malibu had been 3-5 feet for a week with not a let up in the swell, the winds stayed light all day and the late afternoon had an incoming tide. The very first wave, I knew I had been riding the WRONG fin set- all along, this board now was one of those magic boards, drive into the bottom and carry the turn around the section, pump along the wall and set the rail for a wrap around cut back onto the lip and white water. As the waves started to approach the inside and run along the beach, bowls would start to form ahead of the curl, perfect set-ups for floater re-entries.

It was a great session, to be an old man, in perfect waves, light crowds and some of my best pals out with me. Rode that board again last fall with the same bunch of pirates at Scorpion Bay, when one day I am gone from this life, someone will ride this board and be as stoked as I have been.

The name of the board........ Ka Po'e A'ea......... "The Wanderer"........... We were a school of mainly military kids, all of us from different corners of the globe, all of us Wanderers

Custom?

2008-12-15T14:10:00.000-08:00

No story here just some pics of a board designed by Bill Thrilkill and "tuned" by me.

Master Shaper I and II

2008-12-01T14:10:00.000-08:00

You can order your DVD directly from me by email at jimthegenius@aol.com

Master I

The Damascus Production Group introduces the first in its "Master Series". This project developed as aspiring shapers and backyard foam scrubbers had a desire to build longer more traditional classic surfboards. The "101" series opened the door for many who had a desire to learn how a modern surfboard is built. The Master Shaper Series takes the concept further and much deeper into the craft, focusing on the lost art techniques used in the '60's and '70's style boards that are today some of the most sought after collectibles. The topics, layout and production of this video project were carefully considered. Using feedback from many of the Internet's most popular surfboard design forums and discussion boards, this program is designed for both the beginner and more advanced builder. Jim Phillips has been involved with many notable labels and projects. Today his name is synonymous with high quality shaping with an emphasis on intricate foam and wood blank designs. This is an unprecedented glimpse over the shoulder of one of surfing's true craftsmen. Other surfboard shaping films include 20 minutes of actual instruction within a film meant primarily for entertainment. In contrast, the Master Shaper Series is an in-depth look into shaping education, filling 2 hours with detailed, informative and applicable instruction.


	Tools/safety Design theory Layout Shaping Finishing

Master II

The final entry in the Master Series. We are calling it the Master Shaper II. The focus of this video is shortboard shaping although we did make sure to include many of the intermediate topics not covered in the first shaper video. This DVD has a much faster pace than the previous two but no less information. There is a lot of ground covered in this disk so it may take a few viewings to get it all down. In contrast to the original Master Shaper Series, this new addition focuses on the modern shortboard. Also included in this DVD is an in-depth look at wooden boards. Check below for a detailed list of contents.

Here are some of the things covered in the shortboard sequences:

Tools (with some new additions)

Very detailed look at the prep sequence

How to compensate for blank discrepencies

Plan shape

Shaping

Sanding

Blank detailing

Finishing work

Template making

Rocker templates

Spin templates

Pulling templates off existing boards

Fin placement explained

A comparison of the different rocker measurement procedures

Here are some of the things covered in the balsa sequences:

Cleaning up the raw materials (balsa block)

Determine and draw rocker

Tool settings and jigs

Cut rocker

Cut redwoood stringers

Glue up blank

Layout plan shape

Shape the blank

Sanding

Finishing

Chambering explanation

Chamber tools and jigs

"Shapers"

2008-12-01T14:02:00.000-08:00

"Shaped by Rob Vaughn".

Another 3rd string rookie. What a forking flapper, uses a machine blank and has the gaul to torture it. Like how he sanded forever on the end of the left bottom. I couldn't stand to have him under my roof; it would make me go INSANE. Think of all those people who are spoon fed great heaping piles of shit because of the "NAME". I would love to see him in action with a real blank, a real hunk of wood down the middle and have to figure out how to turn rail bands with two hands. Next month, I heard Surfers Journal is doing an ironic story on him - the irony is he can't use any electric tools. I did more technical shit today than he has done in a lifetime.

Diff Fin

2008-11-19T15:57:00.000-08:00

This is the Law

2008-11-19T09:04:00.000-08:00

"It is the pervading law of all things organic, and inorganic, of all things physical and metaphysical, of all things human and all things super-human, of all true manifestations of the head, of the heart, of the soul, that the life is recognizable in its expression, that form ever follows function. This is the law."

-Louis Sullivan

Corduroy Lines Vol 7

2008-11-17T11:17:00.000-08:00

A big thanks to UK mag Corduroy Lines for publishing a story on my work. I'll upload the details as a blog entry as well but it's nice to see them in line with the imagery.

Nalu Underground Vol1 Issue 4

2008-11-17T11:14:00.001-08:00

If you click in the magazine name it will take you to a story on the wood board project in Nalu Underground.

Make Surfboards Not Money

2008-11-17T09:22:00.001-08:00

Blood sweat and tears go into each board...this is what I do for a living and 45,000 boards later I'm enjoying making your board just as much as the first one I built back in my dad's carport on Oahu.

Welcome to my blog

2008-11-14T10:10:00.000-08:00

I've been asked to start sharing some of the stories of my life in the surf business plus I'll be posting some of my daily creations.

Also check out www.jimthegenius.com to see the model line up.